2
Keep out of reach of children
Danger of swallowing.
If swallowed, seek medical advice immediately.
Do not disassemble or modify
Doing so may result in fire or electrification, or damage the
equipment being used.
Stop using when any malfunction occurs
(Whenever any smoke, odd odor, unusual noise is detected;
when liquid or foreign objects got inside; or after being
dropped or damaged)
Using it in such a condition may result in fire.
This SDHC memory card can only be used with SDHC
compatible equipment. Before using this card, please confirm
that your equipment is compatible with SDHC memory cards.
¢
You can insert an 8 GB or more SDHC memory card into the
direct slot on a personal computer operating on Windows
Vista. However, Windows Vista may require upgrading before
the memory card can be used. Please refer to:
http://support.microsoft.com/kb/936825
Windows Vista is a registered trademark of Microsoft
Corporation.
You can write notes directly onto this card
with a pen, etc.
Do not use excessive force as it may
damage the card. Take care not to stain the
metal terminals.
≥
Switch the write-protect switch
a
to
“LOCK”. Unlock when you want to record
or edit the card again.
≥
While data is being read or written, do not
remove the card or turn off any equipment
using the card. Do not remove the
batteries from battery-operated
equipment. These actions can cause data to be destroyed.
≥
Make backup copies of your data wherever possible.
Panasonic will not accept responsibility for any data loss or loss
directly or indirectly caused by data loss.
≥
This card is formatted to the SDHC memory card standard. If
reformatting is ever necessary, format it using SDHC
compatible equipment or SD formatting software compatible
with SDHC memory card. Formatting the card with any other
software will make the card non-standard and cause problems
with compatibility and performance. For a free version of SD
formatting software, visit Panasonic’s homepage.
http://panasonic.jp/support/global/cs/sd/download/index.html
≥
Do not use or store in locations directly exposed to sunlight, a
heat vent, or a heating appliance.
≥
Do not disassemble or remodel.
≥
Do not impact, bend, drop, or wet.
≥
Do not touch the metal terminals with your hands or metal
objects.
≥
Do not detach the label on the card.
≥
Do not attach other labels or stickers.
≥
Do not use or store this card in a location subjected to static
electricity or electrical noise. If the host device does not operate
normally due to the effects of static electricity on the card, then
remove the card from the host device and insert it again.
≥
Do not use or store in humid or dusty locations.
≥
Do not use or store in locations exposed to corrosive gases.
SDHC compatible equipment may contain the functions “Format”
and “Erase”. However, in most cases all data on the card will not
be completely erased even after performing these functions.
When disposing or transferring ownership of the card, we
recommend using Panasonic formatting software
(http://panasonic.jp/support/global/cs/sd/download/index.html) to
completely erase all data from the card.
≥
SDHC Logo is a trademark of SD-3C, LLC.
ENGLISH
WARNING
About this SDHC memory card
About writing on this card
Protecting your data
LOCK
Handling and storage precautions
Cautions about disposal or transferring
ownership of this card
RP-SDRC_SDLC_SDHC_E2.book 2 ページ ２０１３年６月２６日 水曜日 午前１０時１４分
