Other
19
1
Put a straight-slot screwdriver (commercially available) into the battery case.
• Make sure to keep fingers away from the tip of the screwdriver.
• Use a screwdriver that fits into the slit on the battery case. If it is too small, the battery case will not open
properly.
2
Use the screwdriver for leverage, and push the upper cover
A
upward.
• Be careful not to touch the battery with the screwdriver.
3
Hold the battery
B
, and remove it.
4
Pull off the battery
B
and separate it from the battery case by cutting off the wires, one
by one, with scissors.
• Insulate the wire parts of the removed battery with cellophane tape.
• Do not damage or dismantle the battery.
1
2
3
4
