Other
18
Restoring to the factory settings
You can restore the unit to the factory settings (original settings upon purchase). Performing the following
procedure returns the volume level, noise cancelling level, etc., to the factory settings and deletes the
information for all registered devices. Charge the battery before restoring the unit.
1
While the power is turned off, press and hold [ ] for at least 5 seconds until the power/
pairing LED lights alternately in blue and red.
2
While the power/pairing LED is lighting alternately in blue and red, press and hold [
i
]
and [
j
] at the same time for at least 5 seconds.
• The default settings will be restored after the power/pairing LED (blue) blinks fast and the unit turns off.
∫
Attention
• When pairing a device again, delete the registering information (Device: “RB-M700B”) from the Bluetooth
®
device’s
menu, and register this unit with the Bluetooth
®
device again. (
