83
ª
Changing the Counter Display Mode
By changing [C.DISPLAY] on the
[DISPLAY SETUP] Sub-Menu, you can change the
Counter Display Mode to Tape Counter Indication
(0:00.00), Memory Counter Indication (M0:00.00),
and Time Code Indication (0h00m00s00f).
≥
You can also press the [COUNTER] Button of the
Remote Controller repeatedly to change the
Counter Indication.
ª
Displaying Date/Time Indication
To display Date/Time Indication, set the appropriate
Date/Time in [DATE/TIME] on the
[DISPLAY SETUP] Sub-Menu.
≥
You can also press the [DATE/TIME] Button on
the Remote Controller repeatedly to display or
change the Date/Time Indication.
ª
Changing the Display Mode
By changing [DISPLAY] on the [DISPLAY SETUP]
Sub-Menu, Counter Display Mode changes to All
Function Display, Partial Display, and Minimum
Display.
~~~~~~~~~~~~~~~~
Initializing the Modes
You can change the Menu settings back to the
shipping condition.
1
Set [CAMERA FUNCTIONS] >>
[OTHER FUNCTIONS 2] >>
[INITIAL SET] >> [YES].
≥
The initializing takes a while.
≥
After the initializing is completed, the
[COMPLETED] Indication appears with beeps.
≥
Initializing will not erase the clock setting that
has been adjusted.
~~~~~~~~~~~~~~~~
Warning/Alarm Indications
If any one of the following indications lights up or
flashes, please check the condition of the
Palmcorder.
EJECT TAPE: After the [DEW DETECTED]
Indication appears, eject the
Cassette.
Y
CHECK REC TAB:
The erasure prevention tab on the
inserted Cassette is open (that is,
set to [SAVE]).
When you are attempting to do
audio dubbing on the unrecorded
(blank) portion of the tape, or you
are attempting to do dubbing
on the
Cassette whose tab is set at
[SAVE].
(
l
50, 67)
Y
TAPE NOT INSERTED:
No Cassette is inserted.
(
l
20)
X
LOW BATTERY MODE:
The Battery is low. Recharge it.
(
l
18)
0
:
The internal lithium battery is low.
(
l
27)
2
END/TAPE END:
The tape ended during recording.
REMOTE/
CHECK REMOTE MODE:
Wrong Remote Controller Mode has
been selected.
(
l
17)
CANNOT REC LP-MODE:
Because the original recording was
done in LP Mode, audio dubbing
cannot be performed.
(
l
50)
INCOMPATIBLE DATA:
This Cassette is incompatible or
contains copy-guard.
Because the medium is protected
by a copy guard, images cannot be
recorded correctly.
°
:
If this Indication appears, return the
LCD Monitor to the original position
in order to check the specific
content of the Warning/Alarm
Indication.
AV INPUT RECORDING:
When you are attempting to record
on the Memory Card during dubbing
(
l
66)
on the Cassette.
NO CARD:
There is no Memory Card inserted.
PLEASE WAIT:
When reading of the Memory Card
(playback, format, when using the
Multi-Picture Function).
(
l
56, 65)
CARD ERROR:
The Memory Card is not compatible
with the Palmcorder.
CHECK SELECT SWITCH:
You are attempting to record a tape
in VCR Mode, with the combination
of modes set with the [TAPE/CARD/
CARD MODE] Selector, this
Indication appears. Pressing the
Recording Start/Stop Button with
[PICTURE] in Camera Mode.
Pressing the PhotoShot Button with
[MPEG4] or [VOICE] in Camera
Mode. Pressing the Recording
Start/Stop Button with [TAPE] and
[PICTURE] in Card Playback Mode.
Pressing the PhotoShot Button with
[PICTURE] in Card Playback Mode.
Others
PV-GS50P.book 83 ページ 2003年6月13日 金曜日 午後3時28分
Содержание PV-GS50S
Страница 111: ...111 Others ...