38
Computer settings
Notes:
• When the projector settings have been changed using a WebBrowser, the
projector will not appear on the connection list until the projector network is
switched to [USER].
• After the projector network has been switched to [USER], manually release the
proxy settings of the WebBrowser used.
Using WebBrowser
Projector settings
WEB CONTROL
ON:
This enables control on the WebBrowser.
OFF:
This disables control on the WebBrowser.
Select [WEB CONTROL] on the network menu
(See page 28)
.
1
Select [ON] or [OFF] with the [
] buttons.
2
Note:
The WebBrowser password is not set at the factory, and should be set on the
WebBrowser. In addition, if you forget the password, select [DEFAULT] at the
network menu and initialize the network settings. (See page 37)
Connect the projector and computer before taking the steps below.
(See page 12 or page 32)
1
LB20NT
OFF
ON
NETWORK
NAME CHANGE
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
STATUS
DEFAULT
SELECT
N E T W O R K
RETRN
ENTER
Click [
] on the launcher
(See page 15)
.
1
Change the projector settings by WebBrowser.
Make the SSID, communication mode, IP address, subnet mask and WEP
settings, and then quit WebBrowser.
2