Panasonic PTAE100U - LCD PROJECTOR, Руководство по обслуживанию, Страница: 22 / 104

- When attaching a new PBS array, be careful not to mistake the
direction.
6. Measurement and Adjustments
6.1. Adjustment Procedure Flowchart
6.2. Cautions for Adjustment
- Never turn off the MAIN POWER switch until every fan completely stops.
- To maintain and ensure safety, always use the designated components
for replacement parts.
- If removing any clamps, lead wires or connectors, always place them
back in their proper locations.
- Be careful not to damage the lead wires or components when using a
soldering iron or similar tool.
6.3. Setting Before Adjustment
- Set up the projector to obtain the projection distance below.
- Turn the zoom ring of the projector to obtain the largest size of the
picture.
6.4. Software for Adjustment
6.4.1. Outline
- This projector needs computer-aided adjustments.
- After the software adjustments, this projector must be turned off and
on again to memorize the settings.
20