[WIDE MODE]
Using this function when displays the incorrect signals input.
1) Press
as
to select [WIDE MODE].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Displays by judging the signal automatically. Set to this mode normally.
[ON]
When input the wide signal.
[OFF]
When input the 4:3 signal.
[SXGA MODE]
This function is used if the whole projected image is not displayed when SXGA signal is input.
1) Press
as
to select [SXGA MODE].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Displays by judging the signal automatically. Set to this mode normally.
[SXGA]
Switch the item to [SXGA] or [SXGA+] manually if the whole projected image is not displayed
when SXGA signal is input.
[SXGA +]
[P-TIMER]
Set and operate the presentation timer function.
Setting the mode
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The [P-TIMER] screen is displayed.
3) Press
as
to select [MODE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[COUNT UP]
Displays the elapsed time since the count was started.
[COUNT DOWN]
Displays the remaining time of the time set by [TIMER].
Setting the countdown timer
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The [P-TIMER] screen is displayed.
3) Press
as
to select [TIMER].
4) Press
qw
to set the time.
f
The time can be set in 1-minute increments from 1 to 180 minutes.
f
The factory default value is 10 minutes.
Note
f
[TIMER] is enabled when [MODE] is set to [COUNT DOWN].
Using the presentation timer
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The [P-TIMER] screen is displayed.
3) Press
as
to select the item, and press the <ENTER> button.
ENGLISH
-
69
Chapter 4
Settings — [DISPLAY OPTION] menu
