Panasonic PT-VX400NTU Скачать руководство пользователя страница 2

Read this first!

2

 - ENGLISH

Important 

 

Information

Read this first!

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT 

TO RAIN OR MOISTURE.

Power Supply:

This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only.

CAUTION:

The AC power cord which is supplied with the projector as an accessory can only be used for 

power supplies up to 125 V, 10 A. If you need to use higher voltages or currents than this, you will 

need to obtain a separate 250 V power cord. If you use the accessory cord in such situations, fire 

may result.

WARNING:

RISK OF ELECTRIC SHOCK, DO NOT OPEN.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the 

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may 

be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of 

important operating and maintenance (servicing) instructions in the literature accompanying the 

product.

CAUTION:

This equipment is equipped with a three-pin grounding-type power 

plug. Do not remove the grounding pin on the power plug. This plug 

will only fit a grounding-type power outlet. This is a safety feature. If 

you are unable to insert the plug into the outlet, contact an electrician. 

Do not defeat the purpose of the grounding plug.

Do not remove

   

WARNING:

              TURN OFF THE UV LAMP BEFORE OPENING THE LAMP COVER.

Содержание PT-VX400NTU























































































Отзывы: