Panasonic PT-VW545N Скачать руководство пользователя страница 143

Страница: 143 / 181

Playing back still images

This section describes the procedure using an operation example on the Memory Viewer screen in thumbnail

view.

Playback on the Memory Viewer screen in list view can be performed with the same procedure except for the file

selection.

PLAY

ENTER

RETURN

CANCEL

Operation guide

Example of display during automatic playback (still image)

When automatic playback is enabled

This section describes the operations when the [NETWORK/USB] menu → [MEMORY VIEWER]

→

[AUTOPLAY]

(

page 108) is set to [ON]. In this case, all still image files in the same folder are played back automatically

according to the settings in the [NETWORK/USB] menu → [MEMORY VIEWER] (

page 108)

→

[INTERVAL]

and [EFFECT].

1) Press

asqw

to select a file to be projected first from the thumbnails, and press the <ENTER>

button.

Playback starts in the full-screen display.

Pressing the <ENTER> button during playback pauses automatic playback. Pressing it again resumes

playback.

After playback ends, playback of the next file starts.

Pressing

during playback skips the file being played back and continues automatic playback from the

next file.

Pressing

during playback returns playback to the previous file and continues automatic playback.

Pressing

during playback rotates the image 90° clockwise with the aspect ratio maintained.

Pressing

during playback rotates the image 90° counterclockwise with the aspect ratio maintained.

2) Press the <AUTO SETUP/CANCEL> button.

Automatic playback ends and the Memory Viewer screen (thumbnail view) returns.

When automatic playback is disabled

This section describes the operations when the [NETWORK/USB] menu → [MEMORY VIEWER]

→

[AUTOPLAY]

(

page 108) is set to [OFF]. In this case, select the files to be projected and play back one by one.

1) Press

asqw

to select a file from the thumbnails, and press the <ENTER> button.

The selected still image is played back in the full-screen display.

Pressing

plays back the next file.

Pressing

plays back the previous file.

Pressing

rotates the image 90° clockwise with the aspect ratio maintained.

Pressing

rotates the image 90° counterclockwise with the aspect ratio maintained.

2) Press the <AUTO SETUP/CANCEL> button.

Full-screen display ends and the Memory Viewer screen in thumbnail view returns.

ENGLISH

143

Chapter 5 Operation of Function - Projecting with Memory Viewer

Содержание PT-VW545N






















































































































































































Результаты поиска

Содержание PT-VW545N

Отзывы:

Panasonic PT-VW545N, Руководство по эксплуатации, Страница: 143 / 181

Результаты поиска

Содержание PT-VW545N

Отзывы: