Network
ENGLISH -
69
Settings
Network config page
J
You can change network settings on projector when
connecting with the administrator authority.
LAN settings
z
Click [Detailed set up] in the menu.
1 )
Click [Change] to change the LAN settings.
2 )
z
To return to the previous window, click [Back].
Complete the detailed settings and
3 )
click [Next].
When [Next] is clicked, the next page appears, enabling
z
you to complete the detailed settings as desired.
Settings performed here are the same as the
settings performed with the [Network] menu of
the projector.
Click [Submit].
4 )
z
The settings will be registered.
Note
Changing the setting of LAN while connected with
z
LAN might disconnect the connection.
Ping test page
J
This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS
server, etc.
Click [Detailed set up], then [Ping test] to display the Ping test page.
Display which appears when the connection
was successful.
Display which appears when the connection
failed.
1 Enter the IP address of the server to be tested.
2 Button for conducting the test.
2
1