Model
PT-VW330
PT-VX400NT
PT-VX400
PT-VX41
Power supply
100-240 V AC, 50/60 Hz
Power consumption
322 W (0.48 W when standby mode
set to Eco*
1
, 12.5 W when standby
mode set to Network.)
322 W (0.48 W when standby mode
set to Eco*
1
, 14.5 W when standby
mode set to Network.)
322 W (0.48 W when standby mode set to Eco*
1
,
10.0 W when standby mode set to Network.)
LCD panel
Panel size
15 mm (0.59 in)
diagonal (16:10 aspect ratio)
16 mm (0.63 in)
diagonal (4:3 aspect ratio)
Display method
Transparent LCD panel (x 3, R/G/B)
Pixels
1,024,000 (1,280 x 800) x 3,
total of 3,072,000 pixels
786,432 (1,024 x 768) x 3,
total of 2,359,296 pixels
Lens
1.6x manual zoom (throw ratio: 1.2–1.9:1),
manual focus, F 1.65–2.33, f 15.47–24.53 mm
1.2x manual zoom
(throw ratio: 1.7–2.1:1), manual focus,
F 1.60–1.76, f 22.33–26.80 mm
Lamp
245 W x 1, lamp replacement cycle (lamp power: Normal/Eco1, Eco2): 3,000 hours/5,000 hours*
2
Screen size (diagonal)
0.76–7.62 m (30–300 in),
16:10 aspect ratio
0.76–7.62 m (30–300 in), 4:3 aspect ratio
1.02–7.62 m (40–300 in),
4:3 aspect ratio
Brightness*
3
3,000 lm (lamp power: Auto/Normal)
4,000 lm (lamp power: Auto/Normal)
Center-to-corner uniformity*
3
85 %
Contrast*
3
2,000:1 (full on/full off, lamp power: Auto)
Resolution
1,280 x 800 pixels*
4
1,024 x 768 pixels*
5
Scanning
frequency
HDMI
f
H
: 25–80 kHz, f
V
: 50–85 Hz, dot clock: 162 MHz or lower
RGB (analog)
f
H
: 15–100 kHz, f
V
: 50–100 Hz, dot clock: 140 MHz or lower
(Signals exceeding the dot clock rate of 140 MHz are downsampled.)
YP
B
P
R
(YC
B
C
R
)
f
H
: 15.75 kHz, f
V
: 60 Hz [480i(525i)]
f
H
: 15.63 kHz, f
V
: 50 Hz [576i(625i)]
f
H
: 31.50 kHz, f
V
: 60 Hz [480p(525p)]
f
H
: 31.25 kHz, f
V
: 50 Hz [576p(625p)]
f
H
: 45.00 kHz, f
V
: 60 Hz [720(750)/60p]
f
H
: 37.50 kHz, f
V
: 50 Hz [720(750)/50p]
f
H
: 33.75 kHz, f
V
: 60 Hz [1080(1125)/60i]
f
H
: 28.13 kHz, f
V
: 50 Hz [1080(1125)/50i]
Video/S-Video
f
H
: 15.75 kHz, f
V
: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], f
H
: 15.63 kHz, f
V
: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift
49:1
9:1
Keystone correction range
Vertical: ±30°
(±20° when Real-Time Keystone)
Vertical: ±40°, Horizontal: ±30°
(Vertical: ±30°, Horizontal: ±20° when
Auto Keystone)
Vertical: ±30°
(±20° when Real-Time Keystone)
Installation
Ceiling/fl oor, front/rear
Terminals
HDMI IN
HDMI 19-pin x 1 (compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200),*
6
audio signal : linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
COMPUTER IN 1
D-sub HD 15-pin (female) x 1 (RGB/YP
B
P
R
/YC
B
C
R
x 1)
COMPUTER IN 2 /
MONITOR OUT
D-sub HD 15-pin (female) x 1 (RGB x1), (input/output selectable using on-screen menu)
(When Monitor Out is selected, the COMPUTER IN 1 signal is output.)
VIDEO IN
Pin jack x 1 (Composite VIDEO)
S-VIDEO IN
Mini DIN 4-pin x 1 (S-VIDEO)
AUDIO IN
Pin jack x 2 (L-R x 1) for VIDEO/S-VIDEO input
COMPUTER AUDIO IN 1
M3 x 1 (L-R x 1)
COMPUTER AUDIO IN 2
(MIC IN)
M3 x 1 (L-R x 1) for audio input or for microphone connection (variable)
AUDIO OUT
M3 x 1 (L-R x 1) for output (variable)
SERIAL IN
D-sub 9-pin (male) x 1 for external control (RS-232C compliant)
LAN
RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1))
USB A
—
USB type-A (for the USB Memory
Viewer) x 1
—
USB B
—
USB type-B (for the USB Display/
Wireless Mouse) x 1
—
Built-in speaker
3.7 cm round shape x 1, output power: 10.0 W (monaural)
Noise level
35 dB (lamp power: Normal), 29 dB (lamp power: Eco1, Eco2)
Cabinet materials
Molded plastic
Dimensions (W x H x D)
350 x 97 x 277 mm (13.8 x 3.8 x 10.9 in) (with legs at shortest position, not including protruding parts)
350 x 97 x 254 mm (13.8 x 3.8 x 10.0 in)
(with legs at shortest position,
not including protruding parts)
Weight
Approximately 3.5 kg (7.7 lbs)
Approximately 3.6 kg (7.9 lbs)
Approximately 3.5 kg (7.7 lbs)
Approximately 3.4 kg (7.5 lbs)
Operating environment
Operating temperature: 5–35°C (41–95°F), operating humidity: 20-80 % (no condensation)
Supplied accessories
Power cord x 1*
7
, power cord holder x 1, wireless remote control unit, batteries (AAA/R03/LR03 type x 2),
carrying bag x 1, computer cable (1.8 m, for VGA) x 1, fi lter cover
Software CD-ROM (Logo Transfer
Software, Multi Projector Monitoring &
Control Software)
Software CD-ROM
(Logo Transfer Software, Multi
Projector Monitoring & Control
Software, Wireless Manager ME 5.5)
Software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring & Control Software)
Specifi cations
*
1
When the Standby mode is set to Eco, network functions such as standby on via LAN are not available.
Also, only certain commands can be received for external control using the serial terminal.
*
2
The values given for the recommended lamp replacement cycles are maximum.
*
3
Measurement, measuring conditions, and method of notation all comply with ISO 21118 international
standards.
*
4
Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.
*
5
Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
*
6
Compliant with VESA CVT-RB.
*
7
Power cords available (x 2) for the PT-VW330EA/ VX400NTEA/ VX400EA/ VX41EA.
Specifi cations
(built-in wireless LAN function)
* Not supported by IEEE802.11n.
7
Model
PT-VX400NT
Standard
IEEE802.11b/g/n
Infrastructure mode
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES),
128 bit/64 bit WEP, WPA-EAP/WPA2-EAP (PEAP [MS-CHAPv2/GTC],
EAP-FAST [MS-CHAPv2/GTC], EAP-TTLS [MD5/MS-CHAPv2])
Ad-hoc mode*
128 bit/64 bit WEP
