Panasonic PT-RZ870, Руководство по эксплуатации, Страница: 63 / 212

Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 63
Initial setting (standby mode)
Set the operation mode during standby. The factory default setting is [NORMAL], which allows you to use the
network function during standby. To keep power consumption low during standby, set this item to [ECO].
After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu
→
[STANDBY MODE].
1) Press
qw
to switch the setting.
4/7
When set to ECO, network functions and SERIAL OUT
terminal, and some RS-232C commands are not
available during standby.
INITIAL SETTING
SET
CHANGE
STANDBY MODE NORMAL
ENTER
2) Press the <ENTER> button to proceed to the initial setting.
Note
f
The preceding initial setting screen is displayed when the projector is switched on for the first time after purchase. When the [PROJECTOR
SETUP] menu → [INITIALIZE] → [ALL USER DATA] is executed, the [STANDBY MODE] setting before executing is displayed.
Initial setting (screen setting)
Set the screen format (aspect ratio) and display position of the image.
After completed the initial setting, you can change the settings of each item from the [DISPLAY OPTION] menu
→
[SCREEN SETTING].
1) Press
qw
to switch the setting.
f
The setting will change each time you press the button.
16:10
5/7
SCREEN POSITION
Set as necessary for the screen in use.
INITIAL SETTING
SET
CHANGE MENU SELECT
SCREEN FORMAT
ENTER