Panasonic PT-RZ470EAK, Инструкция по эксплуатации (Функциональное руководство)

Страница: 52 / 138

Chapter 4 Settings — [PICTURE] menu
52 - ENGLISH
Note
f
When a name is changed, display of the [USER] menu is also changed.
[DAYLIGHT VIEW]
You can correct the image to the optimal vividness even if it is projected under a bright light.
1) Press
as
to select [DAYLIGHT VIEW].
2) Press
qw
or the <ENTER> button.
f
The [DAYLIGHT VIEW] individual adjustment screen is displayed.
3) Press
qw
to switch [DAYLIGHT VIEW].
f
The items will switch each time you press the button.
[AUTO]
Corrects the image vividness automatically.
[OFF] No correction.
[1] Corrects the image to weaken vividness.
[2] Corrects the image to medium vividness.
[3] Corrects the image to high vividness.
Note
f
If [ON] is selected from the [ADVANCED MENU] menu → [EDGE BLENDING], [AUTO] cannot be set.
f
If [REAR/FLOOR] or [REAR/CEILING] is selected from the [PROJECTOR SETUP] menu → [PROJECTION METHOD], [AUTO] cannot be
set.
f
[AUTO] mode may not operate properly if objects are placed on top of the projector.
f
If [PICTURE MODE] is [NATURAL], [REC709], or [DICOM SIM.], the factory default setting is [OFF].
[SHARPNESS]
You can adjust the sharpness of the projected image.
1) Press
as
to select [SHARPNESS].
2) Press
qw
or the <ENTER> button.
f
The [SHARPNESS] individual adjustment screen is displayed.
3) Press
qw
to adjust the level.
Operation Adjustment Range of adjustment
Press the
w
button. Contours become sharper.
0 - 15
Press the
q
button.
Contours become softer.
Note
f
If you press
w
while the adjustment value is [15], the value will become [0]. If you press
q
while the adjustment value is [0], the value will
become [15].
f
[SHARPNESS] cannot be set while displaying 3D images.
[NOISE REDUCTION]
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1) Press
as
to select [NOISE REDUCTION].
2) Press
qw
or the <ENTER> button.
f
The [NOISE REDUCTION] individual adjustment screen is displayed.
3) Press
qw
to switch [NOISE REDUCTION].
f
The items will switch each time you press the button.
[OFF] No correction.
[ON] Corrects the noise.
Attention
f
Setting the projector may result in an image that appears different from the actual image. In such a case, set it to [OFF].
f
[NOISE REDUCTION] cannot be set when viewing 3D videos.