Panasonic PT-RW330U Скачать руководство пользователя страница 87

Страница: 87 / 128

Chapter 4 Settings — [SECURITY] menu

ENGLISH - 87

[CONTROL DEVICE SETUP]

Enable/disable the button operations on the control panel and the remote control.

Press

to select [CONTROL DEVICE SETUP].

Press the <ENTER> button.

The

[CONTROL DEVICE SETUP]

screen is displayed.

Press

to select [CONTROL PANEL] or [REMOTE CONTROL].

Press the <ENTER> button.

The

[CONTROL PANEL]

screen or the

[REMOTE CONTROL]

screen is displayed.

Press

to select [ENABLE] or [DISABLE].

You can set the limitation on the control from the control panel and remote control.

[ENABLE]

Enables all button operations on the projector body and remote control.

[DISABLE]

Disables all button operations on the projector body and remote control.

Press the <ENTER> button.

When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button.

Note

When a button operation is performed on the device set to [DISABLE], the

[SECURITY PASSWORD]

screen is displayed.

To continue operations, enter the security password.

The

[SECURITY PASSWORD]

screen will disappear when the <MENU> button is pressed, or when there is no operation for approximately

ten seconds.

If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot

enter standby).

When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main

menu.

Содержание PT-RW330U

































































































































Результаты поиска

Содержание PT-RW330U

Отзывы:

Panasonic PT-RW330U, Руководство по эксплуатации, Страница: 87 / 128

Результаты поиска

Содержание PT-RW330U

Отзывы: