Panasonic PT-LZ370, Спецификация

Страница: 10 / 11

S
P E C
F
I L E
PT- LZ370
LCD Projector
As of December 2011
SFL11M020-2
1 0 / 1 1
Command example
To set the volume to +30, send the command as shown below.
STX AVL : 30 ETX
Start Command Parameter End
NOTE: When sending commands without parameters, a colon (:) is not necessary.
Parameter format
Parameter format Size (Byte) Definition
<pl>
<off on>
<input signal>
<power condition>
<lamp condition>
<acctch>
<date>
<time>
3 (1 or 2 bytes also
possible when
under control)
1
3
3
1
4
8
6
Decimal without signs: 0 –999 (000, 001, 002...999)
Decimal with signs: -99 to +99 (-99...-01, +00, +01, +02...+99)
Callback from the projector is 3 Byte.
0 = off, 1 = on
HD1 = HDMI 1, HD2 = HDMI 2, RG1 = computer,
YUV = component, VID = video, SVD = S-Video
000 = power off (standby mode off), 001 = power on (standby mode on)
0 = standby, 1 = lamp on under control, 2 = lamp on,
3 = lamp off under control
Dicimal without signs: 0000-9999 hours
y1y2y3y4m1m2d1d2w = year (y) month (m) day (d) day of week (w)
Day of week: Monday = 1, Tuesday = 2, ... Sunday = 7
h1h2m1m2s1s2 = hour (h) minute (m) second (s)
NOTE: If a wrong command is received, the projector will send an ER401 or ER402 command to the computer.