Basic operations
ENGLISH
21
Turn the projector ON or OFF (continued)
TURN THE PROJECTOR OFF
STANDBY
TT
(R)
ON(G)
AUTO
SETUP
MENU
RETURN
ENTER
FREEZE
AV
AA
MUTE
1) 2)
When operating the projector, check the status of the
POWER
indicator. (
1
Press the POWER button.
A confirmation screen will be displayed – the
screen will go off and return to projection if there
is no operation for approximately 10 seconds.
2
Press the button again.
The lamp goes off and the projection stops.
The cooling fan continues its rotation and
•
POWER
indicator lights orange. Wait until the
POWER
indicator turns red.
If
•
STANDBY MODE
is set to
NORMAL
, the
POWER
3
Disconnect the power plug from the wall
outlet after the POWER indicator lights or
flashes in red.
For urgency, you may disconnect the power
•
plug immediately since the
DIRECT POWER
OFF
function is installed.
NOTE:
Confirm that
•
CONTROL PANEL
(when operating with
the projector body) or
REMOTE CONTROLLER
(when
operating with the remote control) under
CONTROL
DEVICE SETUP
in the
SECURITY
menu is set to
ENABLE
.
Power can be turned off by pressing
•
[POWER]
for
at least 0.5 seconds.
POWER
indicator