Zoom/Focus adjustment
Press the ENTER button to display
the individual adjustment screen.
Press the
I
or
H
buttons to adjust
the projected image size.
Press the
F
or
G
buttons to adjust
the projected image focus.
The projected image focus or zoom
can also be adjusted by pressing
the FOCUS +/- or ZOOM +/- buttons
on the projector. To make fine
adjustments to the projected image
focus, use the FOCUS +/- buttons.
49
Ad
v
a
nced
Operation
48
Lens adjustment
Select an item by pressing the
F
or
G
buttons on the remote control unit or
the projector.
LENS SELECT
Change the setting in accordance
with the type of projection lens (sold
separately) by pressing the
I
or
H
buttons.
STANDARD
For standard projection
LONG FOCUS
For long-distance projection
(ET-LE30)
MIDDLE FOCUS
For medium-distance projection
(ET-LE20)
SHORT FOCUS
For short-distance projection
(ET-LE10)
Projection lens replacement
By replacing the projection lens with a lens that is sold separately, you can
change the projection distance.
#
Turn the projection lens
anticlockwise until it is in
position.
$
While pressing the lens
release button, turn the
projection lens anticlockwise
again.
%
Remove the projection lens.
NOTE:
B
When replacing a projection lens, make sure that the power is off (the
Power indicator illuminates green).
B
Do not touch the signal connection. If any dust or lint gets onto the signal
connection, the electrical contact may become poor.
B
Do not touch the surface of the lens with your bare hands.
B
Store the replaced projection lens away carefully to avoid subjecting it to
excessive vibration or shock.
#
Insert the other projection
lens (sold separately) as far
as it will go, while matching
the projection to the groove.
$
Turn the projection lens
clockwise until a click is
heard.
Signal connection
Projection
Groove
LENS
ZOOM/FOCUS
LENS SELECT
STANDARD
SELECT:[^][@]
ENTER:[ENTER]
実行：［ＥＮＴＥＲ］
ESC:[MENU]
ZOOM
FOCUS
←→
↑↓
Removing the lens
Installing the lens
