B
asi
c Op
eration
Remote control operation
E
NGLISH - 24
You can switch the input method manually by
pressing the
COMPUTER
,
NETWORK
(PT-F200NTU only) and
VIDEO
buttons.
Press the required button several times or
I
H
to cycle through the input methods as
follows. The actual projected image will be
changed in a while.
The graphical guidance will be displayed on the upper
right of the projected image and you can confirm the
selected input method which is highlighted in yellow. See
“INPUT GUIDE” on page 34.
J
Pressing the COMPUTER button
J
Pressing the NETWORK button
The
NETWORK
button is only for PT-F200NTU.
See
CD-ROM
contents for more detailed information.
J
Pressing the VIDEO button
J
Pressing the INPUT SELECT
button on the projector
You can highlight items on the screen with
the red laser pointer while projecting the
image in presentations or visual
demonstrations as an eye-catching pointing
device.
Hold down the
LASER
button to goes on the
laser pointer and release to goes off.
J
Deactivating the LASER button
You can deactivate the
LASER
button for an
accidental operation.
1. Open the battery compartment cover of the
Remote control
.
2. Slide the switch tab.
3. Close the battery compartment cover of the
Remote control
.
See “Battery compartment” on page 11.
Switching the input signal
NOTE:
• Only when the
COMPUTER2 SELECT
is set to
INPUT
,
you can switch between
COMPUTER1
and
COMPUTER2
.
COMPUTER1
COMPUTER2
VIDEO
S-VIDEO
COMPONENT
NETWORK
is only for PT-F200NTU.
COMPUTER1
NETWORK
COMPONENT
S-VIDEO
VIDEO
COMPUTER2
NOTE:
• If you select an unplugged input method, the guidance will blink on and off several times.
• See “List of compatible signals” on page 44.
• See “Connections” on page 18.
Using the laser pointer
NOTE:
• The laser pointer should never be projected directly into
the eyes of a person or animal.
• Do not aim the laser at reflective surfaces.
• Do not allow children to use laser pointer.
• Never look directly into the laser beam.
• The laser pointer is not effective with translucent
screens.
• Please read the cautions on the
Remote control
.
• This is a Class 2 laser product.
CAUTION:
Use of controls of adjustments or performance
of procedures other than those specified herein may result in
hazardous radiation exposure.
On
Off
Deactivating switch
Top view
Laser pointer beam emitter
Cautions
