Original Lamp Drive System for Optimal Lamp Performance
Lamps used in a projector require much higher precision than
ordinary household lamps. Panasonic employs a number of new
technologies—including an original lamp drive system—that help
maintain optimal lamp performance for longer-lasting brightness.
This has resulted in a 5,000-hour* lamp replacement cycle.
*
The value given above does not imply a guaranteed amount of time.
The value may vary considerably depending on usage conditions.
Daylight View 4 Technology: Remarkable Detail with
Enhanced Perception of Brightness and Contrast
*
The PT-F200 series feature Panasonic’s
Daylight View 4 technology. Sharp edges are
achieved with the new “Edge
Enhancer Control” and “Gamma
Curve Control.” Remarkable detail is
provided and perceived brightness
and contrast are enhanced, so
images appear crisp, vivid, 3-dimen-
sional and easy to see even in
brightly lit rooms. Daylight View 4
also includes a built-in ambient light
sensor that automatically detects room brightness and adjusts
operation accordingly.
Wide 2x Zoom and Horizontal/Vertical Lens Shift Give You
More Installation Flexibility
Each can project a 120-inch image (diagonal) from any distance
between 11.8 feet (3.6 m) and 23.6 feet (7.2 m). In new installa-
tions, this lets you accommodate a wide range of room sizes and
shapes. And when replacing existing projectors, the new 2x zoom
greatly expands your installation flexibility.
Wired LAN: Web Browser Control/Monitoring, E-Mail
Message Alert (PT-F200NTU)
Anybody can operate the PT-F200NTU by remote control or moni-
tor its status over a LAN network, because it is all done using the
computer’s familiar web browser. Furthermore, the projector sends
an e-mail message to notify the operator when an error has
occurred, or a lamp needs to be replaced.
PJLink
™
compatibility (PT-F200NTU)
The LAN terminals support PJLink
™
class 1 connection. Control with the
same specifications is also possible
when used in a multi-projector sys-
tem with projectors of another brand.
Direct Power Off
Because the cooling fan keeps operating until the lamp is cooled,
you can turn off the room’s main power without waiting for the
projector to cool down.
Easy Lamp Replacement from the Rear
For easier maintenance, you can replace the
lamp from the rear. The lamp is easily
replaced even after the projector is installed
on the ceiling.
Internet
LAN
LAN
PC
PC
PC
PC
PC
PT-F200NTU
Remote Control
L A N
P
C
P
C
P
C
C
ompany
C
controller
C
ompany A
projector
C
ompany B
projector
PT-F200NTU
7.2 m/23.6 feet
120-inch screen
3.6 m/11.8 feet
Ambient light
sensor (ALS)
Daylight View 4 Concept
Daylight View
circuit
LCD panels
Projector
3
* There is no actual change in the rated brightness or contrast ratio.
Simulated image with
Daylight View 4 turned
on. Detail, depth,
brightness and con-
trast over the entire
image are enhanced.
Simulated image with
Daylight View 4 turned
off. Overall contrast
appears lower, and
images in dark areas
are blackened.
C
O N V E N I E N T
F
E A T U R E S F O R
F
I X E D
I
N S T A L L A T I O N
