ADJ-14
SECTION 3 ADJUSTMENTS
2. 2. Update by the serial terminal connection (Main/sub/DIGITAL LINK software
updating)
2. 2. 1. Equipment to be used
1. Computer : Use it for the transfer of software.
2. Communication cable : D-sub 9oin (male/female RS-
232C straight)
3. Service Software : [Main/Sub/Network/Formatter Up
-
date Tool.exe] Service software can be downloaded
from the projector service homepage.
4. Microprocessor software: Please download the file
from the projector service homepage to your PC.
2. 2. 2. Connection Preparations
1. Set the "RS232C" of the "PROJECTOR SETUP"
menu to "PROJECTOR".
2. Confirm the "Projector's ID", "Baudrate" and "Parity" and take a note.
3. Connect the serial cable.
Note:
Set up your computer not to turn in the standby or shutdown during the software updating.
2. 2. 3. Update procedure
1. Set the projector to "Normal-Standby" mode (POWER indicator is Lighting in red).
2. Start up service software with a computer, select Model, and then click the [OK] button.
3. Select "Serial" in "Connection" and input the ID, Port, Baudrate, and click [Connection Check] button.
Computer
Projector
Serial cable
