Specifications
Dimensions
24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
DLP™ chip
×
3, DLP™ projection system
2,304,000 (1,920
×
1,200)
×
3,
total of 6,912,000 pixels
380 W UHM lamps (
HIGH
mode)
×
2
1.78 –25.4 m (70 – 1,000 in),
1.78 –15.24 m (70 – 600 in)
with the ET-D75LE8, 16:10 aspect ratio
12,000 lm*
3
(dual-lamp)
1,920
×
1,200 pixels
(Input signals that exceed this resolution will
be converted to 1,920
×
1,200 pixels.)
SMPTE ST 372 compliant, [RGB 4:4:4 12-bit/10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p,
1080/24sF, 1080/30p [X´Y´Z´ 4:4:4 12-bit] 2,048
×
1,080/24p, 2,048
×
1,080/24sF
SMPTE ST 424 compliant, [RGB 4:4:4 12-bit/10-bit] 1080/50i, 1080/60i, 1080/25p,
1080/24p, 1080/24sF, 1080/30p [ YP
B
P
R
4:2:2 10-bit] 1080/50p, 1080/60p,
SMPTE ST 292 compliant, [ YC
B
C
R
4:2:2 10-bit] 720/50p, 720/60p, 1035/60i,
1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
SMPTE ST 259 compliant, [ YC
B
C
R
4:2:2 10-bit] 480i, 576i
±55 % (±44 % with the ET-D75LE6)
from center of screen (powered)
±20 % (±15 % with the ET-D75LE6)
from center of screen (powered)
Vertical: ±40° *
7
, horizontal: ±15°
Vertical ±40° and horizontal ±40° with the ET-D75LE1/LE2/LE10/LE20,
vertical ±45° and horizontal ±40° with the ET-D75LE3/LE4/LE30/LE40,
vertical ±22° and horizontal ±15° with the ET-D75LE5/LE50,
vertical ±28° and horizontal ±15° with the ET-D75LE6
BNC
×
1 (3G/HD/SD-SDI)
BNC
×
1 (HD/SD-SDI)
BNC
×
1 (3D timing signal)
BNC
×
1 (3D timing signal)
Geometry Manager Pro (included in the ET-UK20)
980 W (1,010 VA)
950 W (980 VA)
24.1 mm (0.95 in) diagonal (4:3 aspect ratio)
DLP™ chip
×
3, DLP™ projection system
1,470,000 (1,400
×
1,050)
×
3,
total of 4,410,000 pixels
1.78 –25.4 m (70–1,000 in),
1.78 –15.24 m (70–600 in)
with the ET-D75LE8, 4:3 aspect ratio
1,400
×
1,050 pixels
(Input signals that exceed this resolution will
be converted to 1,400
×
1,050 pixels.)
±50 % (±40 % with the ET-D75LE6)
from center of screen (powered)
±30 % (±20 % with the ET-D75LE6)
from center of screen (powered)
21.6 mm (0.85 in) diagonal (16:9 aspect ratio)
DLP™ chip
×
3, DLP™ projection system
1,049,088 (1,366
×
768)
×
3,
total of 3,147,264 pixels
1.78 –25.4 m (70 – 1,000 in),
1.78 –15.24 m (70 – 600 in)
with the ET-D75LE8, 16:9 aspect ratio
11,000 lm*
4
(dual-lamp)
1,366
×
768 pixels
(Input signals that exceed this resolution will
be converted to 1,366
×
768 pixels.)
–
–
–
–
±70 % (±60 % with the ET-D75LE6)
from center of screen (powered)
±30 % (±20 % with the ET-D75LE6)
from center of screen (powered)
Vertical: ±40° *
7
–
–
–
925 W (1,010 VA)
900 W (980 VA)
24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
DLP™ chip
×
3, DLP™ projection system
2,304,000 (1,920
×
1,200)
×
3,
total of 6,912,000 pixels
355 W UHM lamps (
NORMAL
mode)
×
2
1.78 –25.4 m (70 – 1,000 in),
1.78 –15.24 m (70 – 600 in)
with the ET-D75LE8, 16:10 aspect ratio
10,600 lm (dual-lamp)
1,920
×
1,200 pixels
±55 % (±44 % with the ET-D75LE6)
from center of screen (powered)
±20 % (±15 % with the ET-D75LE6)
from center of screen (powered)
Vertical: ±40° *
7
, horizontal: ±15°
[SDI IN]
BNC
×
1 (3G/HD/SD-SDI)
–
43 dB (dual lamp operation with lamp
NORMAL
mode),
37 dB (dual lamp operation with lamp
ECO
mode)
120 V, 220 –240 V AC, 50/60 Hz
1,000 W (1,030 VA)
(0.2 W with standby mode set to eco.*
1
6 W with standby mode set to normal. Both with fan stopped.)
970 W (1,020 VA)
(0.3 W with standby mode set to eco.*
1
9 W with standby mode set to normal. Both with fan stopped.)
120 V: max. 3,413 BTU/hour (without light output: 3,249 BTU/hour). 220 –240 V: max. 3,311 BTU/hour (without light output: 3,147 BTU/hour)
Optional powered zoom/focus and fixed-focus lenses
90 %
10,000:1 (full on/off, with
DYNAMIC IRIS
set to “3”)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p
VGA (640
×
480)–WUXGA*
5
(1,920
×
1,200), compatible with non-interlaced signals only, dot clock: 25–162 MHz
f
H
: 15–100 kHz, fV: 24 –120 Hz, dot clock: 20 –162 MHz
f
H
: 15.75 kHz, f
V
: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], f
H
: 15.63 kHz, f
V
: 50 Hz [PAL /PAL-N/SECAM]
Ceiling/floor, front /rear, portrait*
8
DVI-D 24-pin
×
1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
HDMI 19-pin
×
1 (Deep Color, compatible with HDCP)
BNC
×
5 (RGB/ YP
B
P
R
/ YC
B
C
R
/ YC
×
1)
D-Sub HD 15-pin (female)
×
1 (RGB/ YP
B
P
R
/ YC
B
C
R
×
1)
BNC
×
1 (composite video)
D-sub 9-pin (female)
×
1 for external control (RS-232C compliant)
D-sub 9-pin (male)
×
1 for link control
M3
×
1 for wired remote control
M3
×
1 for link control (for wired remote control)
D-sub 9-pin (female)
×
1 for external control (parallel)
RJ-45
×
1 (for network connection, 10Base-T/100Base-T X, compliant with PJLink™)
Molded plastic
530
×
200*
9
×
548.5 mm (20-7/8
×
7-7/8*
9
×
21-19/32 in) (optional lens not included)
Approximately 24 kg (52.9 lbs) (optional lens not included)
45 dB (dual lamp operation with lamp
HIGH
mode), 43 dB (dual lamp operation with lamp
MIDDLE
mode),
37 dB (dual lamp operation with lamp
ECO
mode)
Operating temperature: 0 – 45 °C (32 –113 °F )*
11
, operating humidity: 10 – 80 % (no condensation)
Logo Transfer Software, Multi Projector Monitoring & Control Software
Power cord with secure lock, wireless/wired remote control unit, batteries (R6/A A type
×
2)
Model
Power supply
Power consumption
Dissipation BTU
DLP™ chip
Lens
Lamp
Screen size (diagonal)
Brightness*
2
Center-to-corner uniformity*
2
Contrast*
2
Resolution
Scanning frequency
Optical axis shift*
6
Keystone correction range
Keystone correction range with
optional Upgrade Kit ET-UK20
Installation
Terminals
Cabinet materials
Dimensions (W
×
H
×
D)
Weight*
10
Operation noise*
2
Operating environment
Applicable software
Supplied accessories
120 V AC
220–240 V AC
Panel size
Display method
Pixels
SDI
Dual-link
HD-SDI
3G-SDI
HD-SDI
SD-SDI
HDMI/DVI-D
RGB
YP
B
P
R
(YC
B
C
R
)
Video / Y/C
Vertical
Horizontal
SDI 1 IN
SDI 2 IN
3D SYNC IN/OUT
3D SYNC OUT
DVI-D IN
HDMI IN
RGB 1 IN
RGB 2 IN
VIDEO IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN
PT-
DS12K
PT-
DW11K
PT-
DZ10K
PT-
DZ13K
SMPTE ST 424 compliant,
[RGB 4:4:4 12-bit/10-bit] 1080/50i,
1080/60i, 1080/25p, 1080/24p,
1080/24sF, 1080/30p
[YP
B
P
R
4:2:2 10-bit] 1080/50p, 1080/60p,
SMPTE ST 292 compliant,
[YC
B
C
R
4:2:2 10-bit] 720/50p, 720/60p,
1035/60i, 1080/50i, 1080/60i, 1080/25p,
1080/24p, 1080/24sF, 1080/30p
SMPTE ST 259 compliant,
[YC
B
C
R
4:2:2 10-bit] 480i, 576i
f
H
: 33.75 kHz, f
V
: 30 Hz [1080/30p]
f
H
: 67.50 kHz, f
V
: 60 Hz [1080/60p]
f
H
: 56.25 kHz, f
V
: 50 Hz [1080/50p]
f
H
: 28.13 kHz, f
V
: 50 Hz [1080 (1125)/50i]
f
H
: 28.13 kHz, f
V
: 25 Hz [1080/25p]
f
H
: 27.00 kHz, f
V
: 24 Hz [1080/24p]
f
H
: 27.00 kHz, f
V
: 48 Hz [1080/24sF]
f
H
: 45.00 kHz, f
V
: 60 Hz [720 (750)/60p]
f
H
: 37.50 kHz, f
V
: 50 Hz [720 (750)/50p]
f
H
: 33.75 kHz, f
V
: 60 Hz [1035/60i]
f
H
: 33.75 kHz, f
V
: 60 Hz [1080 (1125)/60i]
f
H
: 15.75 kHz, f
V
: 60 Hz [480i (525i)]
f
H
: 31.50 kHz, f
V
: 60 Hz [480p (525p)]
f
H
: 15.63 kHz, f
V
: 50 Hz [576i (625i)]
f
H
: 31.25 kHz, f
V
: 50 Hz [576p (625p)]
*1 When the
STANDBY MODE
is set to
ECO
, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also,
only certain commands can be received for external control using the serial terminal. *2 Measurement, measuring conditions, and method of notation all comply with ISO
21118 international standards. *3 In Portrait mode, the maximum brightness becomes 10,600 lm. *4 In Portrait mode, the maximum brightness becomes 9,600 lm.
*5 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking). *6 Optical axis shift cannot be
operated with the ET-D75LE50. *7 ±22° with the ET-D75LE50, ±28° with the ET-D75LE6. *8 Requires optional lamp units for portrait mode. *9 With legs at shortest
position. *10 Average value. May differ depending on the actual unit. *11 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the
FAN CONTROL
is
set to
HIGH ALTITUDE MODE
(for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFD320 Smoke Cut Filter,
the operating temperature range is 0 °C to 35 °C (32 °F to 95 °F), and the projector cannot be used in places at high altitude.
W
ITH THE
ET-LAD320P/LAD320PW
MOUNTED FOR THE PORTRAIT MODE
:
The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F). The operating temperature range is 0 °C to 35 °C (32 °F to 95 °F)
when the
FAN CONTROL
is set to
HIGH ALTITUDE MODE
(for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the
ET-SFD320 Smoke Cut Filter, the operating temperature range is 0 °C to 30 °C (32 °F to 86 °F), and the projector cannot be used in places at high altitude.
unit: mm (inches)
20
0
(7
-7
/8
)
530 (20-7/8)
548.5 (21-19/32)
