S
P
E
C
F
I
L
E
PT-
DW730S
/
DW730K
/
DW730LS
/
DW730LK
DLP
™
Projectors
As of December 2011
SFD11M001-1
2 / 1 5
Main unit
Power supply
Power consumption
120 V AC, 60 Hz
220–240 V AC, 50/60 Hz
DLP™ chip
Panel size
Display method
Pixels
Lens
PT-DW730S/DW730K
PT-DW730LS/DW730LK
Lamp
Screen size
Brightness*
2
Center-to-corner uniformity*
2
Contrast*
2
Resolution
Scanning frequency
DVI-D
RGB
YP
B
P
R
(YC
B
C
R
)
Video/S-Video
Optical axis shift
Keystone correction range
Installation
Terminals
DVI-D IN
RGB 1 IN
R, G, B
Y, P
B
, P
R
(Y, C
B
, C
R
)
120 V AC, 7.5 A, 50/60 Hz
220–240 V AC, 4.3 A, 50/60 Hz
790 W (830 VA) (0.2 W with standby mode set to eco*
1
, 8 W with
standby mode set to normal. Both with fan stopped.)
760 W (950 VA) (0.3 W with standby mode set to eco*
1
, 9 W with
standby mode set to normal. Both with fan stopped.)
16.5 mm (0.65 in) diagonal (16:10 aspect ratio)
DLP™ chip × 1, DLP™ system
1,024,000 (1,280 × 800) × 1, total of 1,024,000 pixels
Powered zoom/focus lenses (1.8 – 2.5:1), F 1.7–1.9, f 25.6 – 35.7 mm
Optional powered zoom/focus lenses and fixed-focus lens
300 W (max. 310 W) UHM lamps (× 2) (dual lamp system)
1.27 –15.24 m (50 – 600 inches) (1.27– 5.08 m (50– 200 inches) with the
ET-DLE055), 16:10 aspect ratio
7,000 lumens (dual lamp, lamp mode: high)
90%
2,500:1 (full on/full off, contrast mode: high, brightness: 3,500 lumens)
1,280 × 800 pixels (Input signals that exceed this resolution will be
converted to 1,280 × 800 pixels.)
f
H
: 15 kHz – 91 kHz, f
V
: 50 Hz – 85 Hz, dot clock: 162 MHz or lower
f
H
: 15 kHz – 91 kHz, f
V
: 50 Hz – 85 Hz, dot clock: 150 MHz or lower
480i (525i):
f
H
15.75 kHz; f
V
60 Hz,
576i (625i):
f
H
15.63 kHz; f
V
50 Hz,
480p (525p):
f
H
31.50 kHz; f
V
60 Hz,
576p (625p):
f
H
31.25 kHz; f
V
50 Hz,
720 (750)/60p:
f
H
45.00 kHz; f
V
60 Hz,
720 (750)/50p:
f
H
37.50 kHz; f
V
50 Hz,
1035/60i:
f
H
33.75 kHz; f
V
60 Hz,
1080 (1125)/60i: f
H
33.75 kHz; f
V
60 Hz,
1080 (1125)/50i: f
H
28.13 kHz; f
V
50 Hz,
1080/25p:
f
H
28.13 kHz; f
V
25 Hz,
1080/24p:
f
H
27.00 kHz; f
V
24 Hz,
1080/24sF:
f
H
27.00 kHz; f
V
48 Hz,
1080/30p:
f
H
33.75 kHz; f
V
30 Hz,
1080/60p:
f
H
67.50 kHz; f
V
60 Hz,
1080/50p:
f
H
56.25 kHz; f
V
50 Hz
f
H
: 15.75 kHz, f
V
: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
f
H
: 15.63 kHz, f
V
: 50 Hz [PAL/PAL-N/SECAM]
Vertical: +60% (powered), horizontal: ±10% (powered)
Vertical: ±40° (±30° with the ET-DLE055 and ET-DLE080)
Ceiling/floor, front/rear
DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible, for single link
only
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 × 480) – WUXGA*
3
(1,920 × 1,200), compatible with non-
interlaced signals only, dot clock: 25–162 MHz
BNC × 5
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative)
NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
Y: 1.0 Vp-p (including sync signal), P
B
/P
R
(C
B
/C
R
): 0.7 Vp-p, 75 ohms
Specifications