Panasonic PT-D5600U, Руководство по обслуживанию

Страница: 17 / 132

6 Using a Wired Remote Control
6.1. Connection Example
When multiple main units are connected in the system, connect the units with the M3 stereo mini jack cable available in the market
to simultaneously control the multiple main units with a single remote control unit through the REMOTE1 IN/OUT terminal. It is
effective to use the wired remote control in the environment in which an obstacle stands in the light path or where devices are
susceptible to outside light.
6.2. Setting the Projector ID Number for Remote Control
Every projector has its ID number and the ID number of the controlling projector must be set to the remote control in advance so
that the user can operate the remote control. The ID number of the projector is set to “ALL” on shipping, and use the ID ALL button
of the remote control when using only a single projector.
Procedure of ID setting
1. Change the position of the operation mode selector switch to “Computer”.
2. Press the ID SET button, and within five seconds use the number (0 to 9) buttons to enter the 2-digit ID number set by the
projector.
3. Change the position of the operation mode selector switch to “Projector”.
However, if the ID ALL button is pressed, the projector can be controlled regardless of the ID number of the projector
17
PT-D5600U / PT-D5600E / PT-D5600UL / PT-D5600EL / PT-DW5000U / PT-DW5000E / PT-DW5000UL / PT-DW5000EL