7
Accessories
Check that all of the accessories shown below have been included with your projector.
When inserting the battery, make sure the polarities (+ and -) are correct.
• If the battery is inserted incorrectly, it may explode or leak, and fire, injury or contamination of the battery
compartment and surrounding area may result.
• Do not use a new battery together with an old battery.
• Remove the batteries if you are not going to use the projector for a prolonged period of time.
Use only the Specified battery.
• If incorrect batteries are used, they may explode or leak, and fire, injury or contamination of the battery
compartment and surrounding area may result.
Do not look into the lens while the projector is being used.
• Strong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes.
Do not use the old lamp unit.
• The lamp section may break.
When the lamp bursts, handle it properly and observe the below precautions.
• There may be shards of glass scattered inside the projector and inside the lamp unit.
• Ask the dealer to replace the lamp and inspect the inside of the projector.
• Gas and fine particles may be blown out through the ventilation holes. The gas contains mercury. If you breathe
in any of the gas, or if it gets in your eyes or mouth, consult a physician immediately.
Disconnect the power cord plug from the wall outlet as a safety precaution before
carrying out any cleaning.
• Electric shocks can result if this is not done.
Ask an Authorized Service Center to clean inside the projector at least once a year.
• If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with operation.
• It is a good idea to clean the inside of the projector before the season for humid weather arrives. Ask your
nearest Authorized Service Center to clean the projector when required. Please discuss with the Authorized
Service Center regarding cleaning costs.
Do not reach for the openings beside the optical lens, during horizontal or vertical
movements of the lens there is a injury hazard.
Remote control unit
[N2QAEA000023 x 1]
Power cord
[K2CG3FZ00008 x 1]
Lens cover
[TKKL5244-1 x 1]
Battery for remote control unit
[R03NW/2ST x 1]
