background image

2

 - ENGLISH

Important 

 

Information

Read this first!

WARNING:

THIS APPARATUS MUST BE EARTHED.

WARNING

:     To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain 

or moisture. 

This device is not intended for use in the direct field of view at visual display workplaces. To avoid 

incommoding reflexions at visual display workplaces this device must not be placed in the direct 

field of view.

 

The equipment is not intended for used at a video workstation in compliance BildscharbV.

The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.

WARNING:

1.    Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.

2.     To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to 

qualified service personnel.

3.     Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing 

type mains plug. This plug will only fit an earthing-type mains socket. This is a safety feature. If you are 

unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the 

earthing plug.

CAUTION:

To assure continued compliance, follow the attached installation instructions. The user must use 

the provided RGB computer interface cable with ferrite cores. If HDMI interface cable is to be 

used, the user must use only shielded HDMI interface cable with ferrite cores to avoid potential 

harmful interference. Any unauthorized changes or modifications to this equipment will void the 

user’s authority to operate.

Product information (for Turkey only)

EEE  Yönetmeliğine Uygundur.

EEE  Complies with Directive of Turkey.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT 

TO RAIN OR MOISTURE.

Содержание PT-CW240E











































































Отзывы: