Basic O
p
eration
Remote control operation
E
NGLISH - 23
You can switch the input method manually
by pressing the
INPUT
button. Press the
button several times or press
I
H
to cycle
through the input methods as follows. The
actual projected image will be changed in a
while.
The graphical guidance will be displayed on the upper
right of the projected image and you can confirm the
selected input method which is highlighted in yellow. See
“INPUT GUIDE” on page 40.
The aspect ratio will be selected
automatically, or you can switch it manually
by pressing the
ASPECT
button. Press the
button several times to cycle through the
different aspect type as follows. See
“ASPECT” on page 36.
Q
VIDEO/S-VIDEO/COMPONENT (YP
B
P
R
)
Q
COMPUTER (RGB)
Q
HDMI
You can access saved settings instantly.
See “MEMORY LOAD” on page 34.
1. Select the required setting from
MEMORY1 - 16
.
Undefined setting will not be displayed.
2. Press
ENTER
to activate the selected setting.
Switching the input signal
COMPONENT 1 IN
COMPONENT 2 IN
COMPUTER IN
S-VIDEO IN
HDMI 3 IN
VIDEO IN
HDMI 2 IN
HDMI 1 IN
COMPONENT 1 IN
COMPONENT
(YP
B
P
R
) signals
from the equipment connected to
COMPONENT IN 1
/
COMPONENT IN 2
.
COMPONENT 2 IN
S-VIDEO IN
S-VIDEO
signal from the equipment
connected to
S-VIDEO IN
.
VIDEO IN
VIDEO
signal from the equipment
connected to
VIDEO IN
.
HDMI 1 IN
HDMI
signal from the equipment
connected to
HDMI IN 1
/
HDMI IN 2
/
HDMI IN 3
.
HDMI 2 IN
HDMI 3 IN
COMPUTER IN
COMPUTER
(RGB) signal from the
equipment connected to
COMPUTER IN
.
NOTE:
• If you select an unplugged input method, the guidance will blink on and off several times.
• See “List of compatible signals” on page 47.
• See “Connections” on page 18.
Switching the aspect ratio
4:3
JUST
16:9
ZOOM2
14:9
ZOOM1
4:3
16:9
4:3
16:9
NOTE:
• If you project an image with an unmatched aspect ratio,
the image may distort or some portions may be
cropped. Select an aspect ratio which preserves the
intention of the image creator.
• The order of aspect type is defined not only by the input
method but also by the input signals. See “List of
compatible signals” on page 47.
• If you project a copyrighted image enlarged or distorted
by using
ASPECT
function in commercial use in a
public place, such as a restaurant or hotel, you might
infringe on the copyright of the creator which is
protected by copyright law.
Loading a saved setting
NOTE:
• If you have not saved any settings,
MEMORY1 - 16
will not be displayed.
