28
l
R
OLLER
G
UIDE
I
CON
M
ENU
O
PERATION
Other Adjustments (contd.)
r
CONVERGENCE 1 - In SET UP menu select CONVERGENCE 1 under OTHER ADJ. only after moving the PTV to
adjust for the effects of the earth’s magnetic field on the projection tubes.
Only use the remote control buttons
while adjusting convergence. The front control panel navigation and Action buttons have no effect.
Note:
Convergence seldom needs adjusting except after moving the PTV.
r
Use the navigation buttons on the remote control to align the horizontal and vertical green lines on screen with the
outside reference marks on screen frame, as shown below.
r
Use the navigation buttons on the remote control to align the red cross with the white cross pattern at the center
of the screen.
Note:
To prevent picture tube damage do not leave test pattern on for an extended period of time.
Convergence Adjustment
An adjusted cross pattern appears white with a
minimum of color fringing.
r
Press VOL
u
to display next menu.
OTHER ADJ.
SET UP
AUTO POWER ON
IDIOMA/
LANGUE
PROG CHAN
CC
SET
CONVERGENCE 1
u
CHAN BANNER
ON
u
CONVERGENCE 2
u
CONVERGENCE
GREEN
NEXT : ACTION
Reference Marks
r
Press
to display RED convergence menu.
ACTION
screen frame
r
Press
to store adjustments and to display
normal picture.
ACTION
CONVERGENCE
RED
NEXT : ACTION
CONVERGENCE
BLUE
NEXT : ACTION
r
Press
to display BLUE convergence
menu.
r
Then repeat procedure for adjusting blue.
ACTION
