Panasonic PP103909, Руководство по эксплуатации

Страница: 16 / 24

16
Alarm Time Setting
q
Hold down [ALM] for more than 2 seconds.
( lights.)
(Alarm time display)
“ALM ADJ” is displayed when the alarm time is not
adjusted.
w
Hold down [ALM] for more than 2 seconds after the
above display is shown.
Hour blinks
e
Adjust the hour.
Press [
}
] : sets the hour ahead.
Press [
{
] : sets the hour back.
Hour entered
r
Press [ALM] .
Minute blinks
t
Adjust the minute.
Press [
}
] : sets the minute ahead.
Press [
{
] : sets the minute back.
Minute entered
y
Press [ALM] to complete..
Completed
The alarm is set to ON automatically after complete
alarm time setting.
Alarm indicator (
) lights.
Notes:
• When the clock (
a
page 8) is not set, perform and
complete the alarm time setting, the clock time will set
to “PM 1:00” automatically. Please readjust the clock
time depending on the actual clock time.
• Hold down [
}
] or [
{
] to change numbers rapidly.
• When you want to readjust the alarm time, repeat steps
q
to
y
.
[ALM]
Turning ON/OFF the Alarm
q
Hold down [ALM] for more than 2 seconds.
(Alarm time display)
w
Push [ALM] .
Alarm ON/OFF
Setting
e
Turn [ALM] clockwise or counterclockwise to select
alarm ON or OFF, then push [ALM] again to confirm
the setting.
(Select alarm ON, lights.)
Notes:
• Before turn ON the alarm, make sure the alarm time is
set. Failure to heed this will cause invalid selection of
alarm ON.
• Hold down [ALM] for more than 2 seconds when the
alarm is sounding also turns off the alarm.
• Access of alarm ON/OFF is available by push [ALM] in
the “Alarm time display”.
Activating Snooze
Press any button on this unit when the alarm is sound-
ing.
The alarm will sound again in 9 minutes.
Note:
If you do not turn the alarm off when the alarm is
sounding, the alarm sound will shut off after an hour.
(including the amount of time the alarm was post-
poned (snooze))
Alarm Setting
CQ̲5105U 10/01/12 18:02 ページ 16 ( ブラック 版 )