Panasonic POVCAM AG-MDR25P Скачать руководство пользователя страница 29

Страница: 29 / 261

- 29 -

Inserting/removing an SD card

Caution:
Check that the access lamp has gone off.

Open the SD card slot cover and insert
(remove) the SD card into (from) the card
slot

≥

One SD card can be inserted into each of the card slot
1 and the card slot 2.

≥

Face the label side

in the direction shown in the

illustration and press it straight in as far as it will go.

≥

Press the center of the SD card and then pull it straight
out.

Securely close the SD card slot cover.

≥

Do not touch the terminals on the back of the SD card.

≥

Do not apply strong shocks, bend, or drop the SD card.

≥

Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the data stored on the
SD card.

≥

When the card access lamp is lit, do not:

Remove the SD card

Turn the unit off

Insert and remove the USB Cable

Expose the unit to vibrations or shock

Performing the above while the lamp is on may result in damage to data/SD card or this unit.

≥

Do not expose the terminals of the SD card to water, dirt or dust.

≥

Do not place SD cards in the following areas:

In direct sunlight

In very dusty or humid areas

Near a heater

Locations susceptible to significant difference in temperature (condensation can occur.)

Where static electricity or electromagnetic waves occur

≥

To protect SD cards, return them to their cases when you are not using them.

≥

About disposing of or giving away the SD card. (

)

When using an SD card for the first time, it is necessary to format the SD card. (

) When the SD card is

formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored.







Access lamp

≥

When this unit is accessing the SD card, the
access lamp lights up.

AG-MDR25PJ.EJ(DVQP1328ZA)_E.book 29 ページ２０１７年５月２２日　月曜日　午後６時１４分

Содержание POVCAM AG-MDR25P






































































































































































































































































Результаты поиска

Содержание POVCAM AG-MDR25P

Отзывы:

Похожие инструкции для POVCAM AG-MDR25P

Бренды по названию

Популярные бренды

Panasonic POVCAM AG-MDR25P, Руководство по эксплуатации

Результаты поиска

Содержание POVCAM AG-MDR25P

Отзывы:

Похожие инструкции для POVCAM AG-MDR25P

Бренды по названию

Популярные бренды