19
PoE power supply is impossible.
Power is not supplied to a Powered Device.
If you use an STP cable, PoE power supply may not be possible depending on
the installation environment. In such cases, use a UTP cable.
Is a CAT5e or better straight cable (RJ45-8/8) used?
Is the cable connected to the port 1–4 that supports PoE power supply?
Ensure that either the port alone or the entire equipment is not overloaded.
Is the Powered Device connected to the port compliant with the IEEE802.3at
(30W) standard?
Port LED (Right) is blinking orange:
Ensure that the total power supply demand from PoE-powered devices does
not exceed 62 W .
When the power supply is suddenly shut off:
It is likely that a PoE-powered device in use has a different power consumption
in normal operation and standby states.
After turning on the PoE LED (power supply mode), confirm that a single port
is not overloaded [the Port LED (left) is not blinking orange] and that the
maximum limit of the total power supply is not exceeded (the PoE LIM. LED is
not blinking orange).
* For detailed configuration and management method, please see
the PDF version Operating Instructions in CD-ROM.
