Panasonic PN261693D, Руководство пользователя, Страница: 97 / 195

97
4.4.3. CIST Basic Port Configuration
Press B (command) on Multiple Spanning Tree Configuration, and then you can see
“CIST Basic Port Configuration” as Figure 4-18. You can perform a CIST basic
port configuration on this screen.
Figure 4-18: CIST Basic Port Configuration
Screen Description
Port Displays the port-number.
Trunk If trunking is configured, the group number (key) of trunking is displayed.
Link Displays a link condition.
UP
UP indicates that a link is established normally.
DOWN DOWN indicates that a link is not established.
State Displays a current port condition.
Forwarding
Displays the condition, which is operating a normal
communication, as a result of a calculation.
Learning Displays the condition, which is calculating based on information.
Discarding Displays the condition, which does not calculate.
Role Displays a port role on a spanning tree.
Designated
In operation: as a port designated
Root In operation: as a route port
Alternate In operation: as an alternate port
Backup In operation: as a back up port
Disabled STP is not in operation.
Pri. Displays the priority of each port in a switch. The higher the numeric value is, the
higher priority will be. All the ports are configured to 128 when shipping from a
factory. (A value is factor or multiple of 16.)
Path Cost Displays cost(s) of each port. 20,000(A) is configured when shipping from a fac
-
tory.
PNxxxxxx Local Management System
Multiple Spanning Tree Configuration -> CIST Basic Port Configuration
Port Trunk Link State Role Pri. Path Cost STP Status Guard
---- ----- ---- ---------- ---------- ----- --------- ---------- --------
1 --- Down forwarding nonStp 128 20000 Enabled Disabled
2 --- Down forwarding nonStp 128 20000 Enabled Disabled
3 --- Down forwarding nonStp 128 20000 Enabled Disabled
4 --- Down forwarding nonStp 128 20000 Enabled Disabled
5 --- Down forwarding nonStp 128 20000 Enabled Disabled
6 --- Down forwarding nonStp 128 20000 Enabled Disabled
7 --- Down forwarding nonStp 128 20000 Enabled Disabled
8 --- Down forwarding nonStp 128 20000 Enabled Disabled
9 --- Down forwarding nonStp 128 20000 Enabled Disabled
10 --- Down forwarding nonStp 128 20000 Enabled Disabled
11 --- Down forwarding nonStp 128 20000 Enabled Disabled
12 --- Down forwarding nonStp 128 20000 Enabled Disabled
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page Set Port Path [C]ost Set Port STP [S]tatus
[P]revious Page Set Port BPDU [G]uard Status [Q]uit to previous menu
Set Port Pr[i]ority
Command>
Enter the character in square brackets to select option