Panasonic PN261693D, Руководство пользователя, Страница: 48 / 195

48
3.5.5. LED Base Mode Configuration
Press B (command) on the screen of System Security Configuration, and then you
can see LED Base Mode Configuration as Figure 3-14. You can configure the LED
base mode on this screen.
Figure 3-14: LED Base Mode Configuration
Screen Description
The following describes how to use several commands on this screen.
Exception
Handler Displays the current LED base mode.
The status mode (Status) is configured to the factory default settings.
Status
Displays (or shows) that it is in operation as the status mode.
Eco Displays that it is in operation as the ECO mode.
B Changes LED base mode.
Press B (command), and then the appearance of the command prompt becomes “Select
LED Base Mode (S/E)>”. After that, press E when changing to the ECO mode, and S when
changing the LED base.
Q Returns to the top menu.
PNxxxxxx Local Management System
System Security Configuration -> LED Base Mode Configuration
Exception Handler: Status
-------------------------------- <COMMAND> -----------------------------------
Set LED [B]ase Mode
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option