Panasonic PN261693D, Руководство пользователя, Страница: 46 / 195

46
3.5.4. SSH Server Configuration
Press H (command) on the screen of the System Security Configuration, and then
you can see “SSH Server Configuration” as Figure 3-13. You can configure the
SSH servers on this screen. This device supports SSHv2, only. Use a client that sup
-
ports the SSHv2 to be connected.
Figure 3-13: SSH Server Configuration
Screen Description
SSH UI Idle Timeout Displays the time needed as the unit of minute until a session is killed
(or disconnected) if nothing is entered when connecting remotely using
the SSH. The factory default settings is 3 minutes (180 seconds).
SSH Auth. Idle Timeout Displays the response time for the SSH authentication. The factory
default settings is 2 minutes (120 seconds).
SSH Auth. Retries Time Displays the number of retransmitting the SSH authentications. The
factory default settings is three (3) times.
SSH Server Displays if the SSH ensures access (or accessibility). The factory default
settings is set to “Disabled”.
Enabled (SSH)
Accessible
Disabled Inaccessible
SSH Server key Displays the status of the SSH server key of RSA method. The status of
the factory default settings is set to “Key exists”.
Key exists.
A server key exists.
Key does not exist. A server key does not exist.
PNxxxxxx Local Management System
Basic Switch Configuration -> SSH Server Configuration
SSH UI Idle Timeout: 3 Min.
SSH Auth. Idle Timeout: 120 Sec.
SSH Auth. Retries Time: 3
SSH Server: Disabled
SSH Server key: Key exists
-------------------------------- <COMMAND> -----------------------------------
[G]enerate SSH Server key Enable/Disable SS[H] Server
Set SSH UI Time [O]ut Set SSH [A]uthentication Time Out
Set SSH Authentication [R]etries Time [Q]uit to previous menu
Command>
Enter the character in square brackets to select option