Panasonic PN261693D, Руководство пользователя, Страница: 42 / 195

42
3.5.2. RADIUS Configuration
Press R (command) on the screen of System Security Configuration, and then you
can see RADIUS Configuration Menu as Figure 3-11. You can configure the access
to the RADIUS server, which is used for the IEEE802.1X authentication on this
screen.
Figure 3-11: RADIUS Configuration
Screen Description
The following describes how to use several commands on this screen.
NAS ID Displays an authentication ID (NAS Identifier).
Index Displays the entry number of the access configuration for the RADIUS sever.
Server IP
Address Displays an IP address of the RADIUS server. The address is not set to the factory
default settings, and thus 0.0.0.0 is displayed.
Shared Secret Displays the shared secret used during the authentication process. The same
configuration needs to be set between the related server and the client-side. Nor
-
mally, a system administrator configures it, so the configuration is not set during
the factory default settings. If encrypted, you can see [encrypted] on the screen.
Response Time Displays the maximum waiting time to the authentication requirement to the
RASDIUS server. The factory default settings is five (5) seconds.
Maximum
Retransmission Displays the number of times for retransmitting the authentication requirement
(or request) to the RADIUS server. The factory default settings is twice.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P to display the previous page.
PNxxxxxx Local Management System
System Security Configuration -> RADIUS Configuration Menu
NAS ID: nas1
Index Server IP Address Shared Secret Response Time Max Retransmission
----- ----------------- -------------------- ------------- ------------------
1 1.2.3.4 5 seconds 2
2 0.0.0.0 5 seconds 2
3 0.0.0.0 5 seconds 2
4 0.0.0.0 5 seconds 2
5 0.0.0.0 5 seconds 2
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set N[A]S ID
Set Server [I]P
Set Shared Se[c]ret
Set [R]esponse Time
Set [M]ax Retransmission
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option