Panasonic PN261693D, Руководство пользователя, Страница: 26 / 195

26
3.2.2. SNMP Trap Receiver Configuration Menu
Press T (command) on SNMP Configuration Menu, and then you can see SNMP
Trap Receiver Configuration Menu as Figure 3-5. You can implement the configura
-
tion of sending SNMP traps on this screen. See section 3.2.1 when configuring the
privilege (read-write/read-only) of the destination for sending SNMP traps.
Figure 3-5: SNMP Trap Receiver Configuration Menu
Screen Description
Trap
Receiver List Displays the IP address and the community name of a trap-destination, which are
currently configured.
No.
Displays the entry number of the trap destination.
Trap
Status Displays if traps need to be sent.
Enable
Sends traps.
Disable Does not send traps.
Type Displays the type of traps.
v1
Sends SNMP v1 traps.
v2c Sends SNMP v2c traps.
IP Address Displays a host IP address of an SNMP manager.
Community Displays the community name, which is currently configured when
sending traps.
PNxxxxxx Local Management System
SNMP Configuration -> SNMP Trap Receiver Configuration Menu
Trap Receiver List:
No. Status Type IP Address Community
---- -------- ----- --------------- ----------------------------
1 Enabled v1 172.16.222.1 public
2 Disabled v1 0.0.0.0
3 Disabled v1 0.0.0.0
4 Disabled v1 0.0.0.0
5 Disabled v1 0.0.0.0
6 Disabled v1 0.0.0.0
7 Disabled v1 0.0.0.0
8 Disabled v1 0.0.0.0
9 Disabled v1 0.0.0.0
10 Disabled v1 0.0.0.0
-------------------------------- <COMMAND> -----------------------------------
Set Receiver [S]tatus Set Receiver [I]P In[d]ividual Trap Config
Set Trap [T]ype Set Receiver [C]ommunity [Q]uit to previous menu
Command>
Enter the character in square brackets to select option