Panasonic PN261693D, Руководство пользователя, Страница: 173 / 195

173
4.13.
Digital Diagnostic Monitoring
Press G (command) on the screen of Advanced Switch Configuration, and then you
can see Digital Diagnostic Monitoring Menu as Figure 4-59. You can configure a
function of checking the SFP module status on this screen.
Figure 4-59: Digital Diagnostic Monitoring
Screen Description
Limit Trap Status Displays the configuration to enable or disable to outgo SNMP traps
during the status change.
SFP port-number Displays the port where the SFP is plugged.
Tranceiver Type Displays the SFP type.
Vender Name Displays the name of an SFP maker.
Vender Product Number Displays the SFP part number.
Vender Serial Number Displays the SFP serial number.
Rx Power (dBm) Displays the received optical power of the SFP.
Tx Power (dBm) Displays the transmitted optical power of the SFP.
Temp (deg. C) Displays an SFP temperature.
Voltage (V) Displays the operating voltage of the SFP.
Bias Current (mA) Displays the operating current of the SFP.
Status Displays the SFP status.
High Alarm Displays the upper threshold of the alarm.
High Warning Displays the upper threshold of warning.
Low Alarm Displays the lower threshold of alarm(s).
Low Warning Displays the lower threshold of warning.
PNxxxxxx Local Management System
Advanced Switch Configuration -> Digital Diagnostic Monitoring Menu
Limit Trap Status : Disabled
SPF port-number : 25 Transceiver Type :
Vender Name : Vender Product Number :
Vender Serial Number :
RX Power TX Power Temp Voltage Bias Current
(dBm) (dBm) (deg.C) (V) (mA)
---------- ----------- ---------- -------- ------------
Status 0.000 0.000 0.000 0.000 0.000
High Alarm 0.000 0.000 0.000 0.000 0.000
High Warning 0.000 0.000 0.000 0.000 0.000
Low Alarm 0.000 0.000 0.000 0.000 0.000
Low Warning 0.000 0.000 0.000 0.000 0.000
-------------------------------- <COMMAND> -----------------------------------
[N]ext SFP Port Set [R]x Power Limit Set T[e]mp Limit
[P]revious SFP Port Set [T]x Power Limit Set [B]ias Current Limit
Set Limit Trap [S]tatus Set [V]oltage Limit [Q]uit to previous menu
Command>
Enter the character in square brackets to select option