Panasonic PN261693D, Руководство пользователя, Страница: 103 / 195

103
4.4.6. MST Instance Configuration
Press M (command) and enter an MST instance ID on MSTP Instance
Configuration. After that, you can see the MST Instance Configuration as Figure 4-
21 below. You can implement the advanced settings for the MST instance on this
screen.
Figure 4-21: MST Instance Configuration
Screen Description
The following describes how to use several commands on this screen.
MSTI Root Port Displays the route port-number of the MST instance.
MSTI Root Cost Displays the value of route path cost of the MST instance.
Time Since
Topology
Change Displays the elapsed time (seconds) after changing the configuration of a
spanning tree.
Topology
Change Count Displays the number of that configuration of a spanning tree is changed.
MSTI Regional
Root Displays an ID of a regional route bridge of the MST instance.
MSTI Bridge ID Displays a bridge ID of the MST instance.
I Configures a bridge priority of the MST instance.
Press I (command), and then the appearance of the command prompt becomes “Enter
MSTI Priority>”. Enter the value of the bridge priority.
Q Returns to the top menu.
PNxxxxxx Local Management System
MST Instance Configuration -> MST Instance Configuration
MSTI Root Port: 0 Time Since Topology Change: 0 Sec.
MSTI Root Cost: 0 Topology Change Count: 0
MSTI Regional Root:0 000000000000 MSTI Bridge ID: 8000 000000000000
-------------------------------- <COMMAND> -----------------------------------
Set MSTI Bridge Pr[i]ority
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option