View Window or Whiteboard Window Operation
• Set the marker width, colour or the eraser size
Change the width and colour of the markers and the size of the
eraser used in the View window or the Whiteboard window.
The marker width and colour can be changed for four marker
colours.
(1) Click [Markers and Eraser...] in the [Settings]
menu.
• The Marker / Eraser Setting dialog box will appear.
(2) To change the width of the markers, either enter
a width in
(Marker Width) at the right
side of the marker whose width will be changed or click the arrows at the right and
left of the scroll bar or drag the scroll bar to the right or left to set a desired width.
To change the colour of the markers, click
(Marker Colour) on the right side of
the marker whose colour will be changed. The Colour dialog box will appear. Click
the colour you want to change from among Basic colours, and click the [OK] button.
To set a highlight marker, check (turn ON) the [Highlight] check box.
To change the size of the eraser, either enter a size in
(Eraser Radius) or
click the arrows at the right and left of the scroll bar or drag the scroll bar to the right
or left to set a desired size.
(3) Click the [OK] button.
(4) A dialog box will appear where you can select whether or not to apply the new
settings to handwritten lines drawn up to now.
Clicking [Yes] button will redraw the lines drawn up to that point using the new
settings.
Clicking [No] button will only reflect the new settings for any subsequently drawn
lines.
• The unit of the maker width and the eraser size is dots in the View window and millimeters or inches in
the Whiteboard window.
• When you check (turn ON) the [Same Width] check box, you can set all markers to the same width by
only setting the width of the black marker.
• The marker width can be set in a range of 1 - 30 dots in the View window and 0.1 - 25.4 mm in the
Whiteboard window.
• When the marker colour is changed, the colour will be displayed on the bottom-right of the Desktop
Drawing Tool marker button, but the marker tool colour will not change.
• When a highlight marker is set, the background under the drawn lines is transparent. In case that the
background is dark and the drawn lines are hard to see, please turn the [Highlight] check box OFF. And
when the line crosses with one of the different colour the part of that becomes dark.
• The eraser radius can be set in a range of 1 - 60 dots in the View window and 0.1 - 50.8 mm in the
Whiteboard window.
• These settings are effective until being changed.
70
Remark:
