PAN9026 Wi-Fi/BT Module
4 Basic Usage
Quick Start Guide Rev. 1.1
Page 10
4
Basic Usage
The basic usage includes all features that can be accessed with the remote device connecting
to the Wi-Fi access point only. It does not need any additional peripherals.
4.1 Basic Setup
The following components are needed:
Wandboard with µSD card with Ubuntu Linux image
PAN9026-MSD with µSD card form factor
Headphones with 3.5
mm jack
Power supply
1. Insert the PAN9026-MSD into the µSD card slot of the Baseboard (1).
2. Insert the headphones with 3.5
mm jack into the green audio socket (2).
3. Insert the power supply (3).
The system will boot up. This takes approximately one minute.
