PAN9026 Wi-Fi/BT Module
5 Application Usage
Developer's Guide Rev. 1.0
Page 15
5.2 Connecting to the Access Point
1. Navigate to the Wi-Fi configuration settings of your device and enable Wi-Fi if it is not
enabled already.
The access point provided by the PAN9026 module is named
PAN9026_uAP0
and will be found
automatically.
2. Click
PAN9026_uAP0
to make the device connect to this access point.
The connection is established and is shown as
Connected, no Internet
.
Add this point you can access the PAN9026 module just fine, but cannot use
any features that required internet access yet.
