PAN4620
3 PAN4620 USB Evaluation-Board Overview
Quick Start Guide Rev. 0.1
Page 9
3.3 Breakout Pins
3.4 Configuration Settings
Jumper
Topview
Description
Detail
J1
5 V from USB
connected
5 V power option, to power the board from USB
or
the 5 V pin. The 5 V from USB can also be
used to power the sensor board.
5 V from or to breakout
pin connected
J3
Module reset connected If there is no firmware on the module, the reset
will be pulled low. This has to be considered
when the module is sharing a common reset
with other components.
Module reset
disconnected
