PAN1740A Bluetooth Module
7 Proximity Profile with two PAN1740A USB-Dongles (Example)
Module Integration Guide Rev. 1.1
Page 20 of 44
7
Proximity Profile with two PAN1740A USB-Dongles
(Example)
This example uses Dialog’s SDK version 3.0.2.1.
The following requirement must be met:
Microsoft
®
Visual C++ 2010 Express
– Freeware Compiler is installed.
Use always the latest release from Dialog
Receiver Configuration
1. Navigate to
DA14580_SDK_3.0.2.1\dk_apps\keil_projects\proximity\
monitor_fe_usb
.
2. Download the image
proximity/monitor_fe_usb
into the USB-Dongle.
For details please refer to
6 Run the Keil Project (Example)
3. Open
Keil Compiler
and compile this project.
Download the .hex-file:
4. Start and stop the debug mode or load the .hex-file with the
Connection Manager
.
For debug mode using the
Keil Compiler
, be sure to check the Configure Flash Tool
setting described in
6 Run the Keil Project (Example)