20
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Playing Back Recordings
Before you begin...
• Connect Camcorder to power source.
• Insert recorded tape.
Tracking Control
Quick Visual Search
Search Speed
• SP (Standard Play) : 3 times normal.
• SLP (Super Long Play) : 9 times normal.
During playback, press:
• FF : fast forward search
• REW : rewind search
Press again
or press PLAY
for normal play.
Still Picture
Press STILL
to freeze picture.
Press again
for normal play.
This feature works best in SLP mode (page 11).
Special Effects
Note:
• During search, horizontal noise bars will appear.
Audio is muted.
• To protect video heads and tape, operating
modes will revert as follows after 5 minutes:
Still
Stand-by
Stand-by
Power off (when Battery Pack is
used).
• Tape auto-rewinds if played or fast forwarded to end.
Note:
• Using LCD monitor reduces battery
operation time. Return LCD monitor to
locked position when not in use.
1
Press LCD-OPEN
and swing LCD
monitor fully open.
• If you want to playback on EVF, close
and lock LCD monitor.
2
Set POWER to VCR.
• If tape has no record tab, auto
playback begins.
• EVF or LCD monitor turns on/off by
the POWER switch.
3
Playback function buttons.
A
REW
: Rewind tape.
B
PLAY
: Play tape.
C
STOP
: Stop tape.
D
BRIGHT
: Adjust LCD monitor brightness.
E
VOLUME
: During playback, adjust
volume of speaker.
Press “T” : Volume
up (+).
Press “W” : Volume
down (-).
Playback on EVF or LCD Monitor
Auto Tracking
Continuously analyzes each recording for
optimum picture quality.
Manual Tracking
Some recordings require manual
adjustment to reduce noise.
Press UP or DOWN
until Playback picture
clears up.
Press DISPLAY
to return to Auto Tracking.
Speaker
1
3
BRIGHT
ADJUSTMENT
D
2
3
B
A
C
E
STILL
04.L352 Basic p20-22
01.12.10, 4:22 PM
20