Panasonic Palmcorder PV-23-K Скачать руководство пользователя страница 10

Страница: 10 / 48

Battery Care

Caution:

•

Charge only with specified charger.

•

The battery pack can be charged within a
temperature range of 32° F (0° C) and 104°
F (40° C).

•

The battery pack may be warm after

charging or just after use. This is normal.

•

To preserve the life of your battery, remove
the battery pack from the Palmcorder and the
AC Adaptor while not in use.

•

Do not use an insufficiently charged or worn

out Battery Pack.

Safety precautions:

•

Do not dispose of in fire. Keep the battery

away from fire.

•

Do not directly connect (short circuit) the

positive (+) and negative (-) terminals.

•

Never attempt to disassemble or reassemble

the battery pack.

Battery Refresh Feature

This feature allows you to completely
discharge the power from the Battery Pack
before recharging. It is recommended you
use this feature after about every 5 charges
to keep your Battery in top operating
condition.

Place the Battery into the AC Adaptor.

BATTERY
REFRESH

Press the BATTERY REFRESH button.

The Charging indicator will flash and
discharging will begin. When discharging is
complete, the indicator will stop flashing.

•

Should you accidentally press the

BATTERY REFRESH button, remove the

Battery Pack then re-insert it to begin
charging.

•

It takes about 5 hours when both Battery

Refresh and charging are performed.

avoid damage to the

battery pack:

•

Do not drop the battery pack or subject it

to a strong mechanical shock.

•

Use the battery pack only with specified

units.

•

If the battery pack is used in an extremely

high temperature, a safety device will
automatically prevent operation of the
battery pack.

obtain longer battery life:

•

While the battery pack is not in use
remove it from the Palmcorder and AC
Adaptor and store it in a cool, dark and dry
place.

•

Keep the battery pack terminals clean.

Содержание Palmcorder PV-23-K

















































Результаты поиска

Содержание Palmcorder PV-23-K

Отзывы:

Panasonic Palmcorder PV-23-K, Руководство по эксплуатации, Страница: 10 / 48

Результаты поиска

Содержание Palmcorder PV-23-K

Отзывы: