Panasonic P2HD AG-HPX502, Руководство пользователя

Страница: 26 / 32

P2 data back-up and creating archives
12
P2 data back-up and creating archives
P2HD
X
AG-HPX502
PRACTICAL GUIDEBOOK
25
* Notes on copying files
• Ensure that there is ample free space on the HDD for the copied files.
• Format the HDD for use with the AG-HPX502 beforehand. (Formatting erases all the data on the HDD.)
• Do not make multiple connections (daisy-chain or hub) to the HDD, even while it is turned off.
• You can copy up to 15 P2 cards onto a single hard disk.
Backing up data onto a HDD (1394 HOST mode)
8. When copying ends, turn the camera off.
<Procedures>
1.Connect the HDD to the AG-HPX502 with an IEEE1394 cable and then turn on the HDD.
2. In the Setup menu:
3. Press the MENU button twice to exit menu mode.
4. Use the operation mode button to turn on the MCR lamp and then hold the button down for at least 2 seconds.
-> The PC lamp lights and the camera switches to PC mode.
6. When formatting ends, use the or button to select COPY TO HDD
and press the button.
5. If the HDD has not been formatted,
use the or button to select FORMAT (HDD) and press the button.
-> HDD formatting begins.
From OTHER FUNCTIONS,
select PC MODE -> Select 1394HOST and press .
7. Use the or button to select one of the card slots (1 to 4) and press .
A slot selection confirmation message (displaying YES or NO) then appears.
To proceed with copying the files, select YES and press the button. -> Copying begins.