7
(1) Remove two blower cover plate mounting screws and two blower unit mounting screws, top and rear.
(Fig.
1-2-1)
(2) Remove the blower cover plate from the product. (Fig. 1-2-1)
(3) Carefully lift the blower unit and put it on top of product. (Fig. 1-3-1)
Fig. 1-3-1
(4) Use side cutters or tin snipper to cut and remove knockout parts “A" from back plate. Discard
knockouts. File the openings smooth to prevent injury caused by sharp edges. (Fig. 1-3-2)
Back Plate
Knockouts Parts "A"
Parts "A"
Fig. 1-3-2
(5) Turn blower unit right to left. Then rotate blower unit 90 degrees so the exhaust ports are facing toward
the rear of the product. (Fig. 1-3-3)
Blower Unit
Exhaust Parts
Fig. 1-3-3
(6) Replace blower unit back into product. Be careful not to pinch the lead wires between blower unit and
oven top. Make sure the fan blades are visible through the exhaust openings on the back plate. (Fig.
1-3-4)
Exhaust Parts
Blower Unit
Back Plate
Fig. 1-3-4
IP2386_38Q01CP_Eng_04_080105.indd 7
IP2386_38Q01CP_Eng_04_080105.indd 7
2009-1-6 Michael 9:16:49
2009-1-6 Michael 9:16:49
