Panasonic OmniVision PV-M1326, Руководство по обслуживанию, Страница: 6 / 173

2-1
DISASSEMBLY METHOD
1 Back Cover D2-1 7(S-1) -
D2-2
2 VCR Unit D3, P354, Anode Cap,
D4 P3004(Model : H,K),
P4152(Model : A,B,C,D,E,F
G,H,I,J),
P4153(Model : H)
P4903 P4905(Model : K),
1
P4904(Model : K),
CRT C.B.A.,
DeflectionYoke Connector,
Degaussing Coil Connector
3 CRT Unit D3 4(S-2) 2
4 Operation I D5 P3004 P4153(Model : A,B), -
and Operation P6001, 6(L-1)
II C.B.A.s
5
Model : K
D6 P4902, P4001, Clamper -
TV Stereo
Amp C.B.A.
6 Top Shield D6 5(S-3) -
Plate Ass'y
7 TV Main D7 P201, P202, P203, P801, 3
C.B.A. 4(L-2)
8 VCR Chassis D8 2(S-4), (S-5), (S-6) 4
Unit Chassis Angle, (L-3)
9 VCR Main D9 (S-7), (S-8), P6002 -
C.B.A. P2501, P3501
10 Cassette Up D10 2(S-9), 2(S-10) 5
Ass'y
11 Mechanism D10 --------------------------- 6
Chassis
Step
/Loc.
No.
Part Remove Fig.
No.
How to read chart shown above :
A : Order of steps in Procedure
When reassembling, perform the step(s) in the reverse
order.
These numbers are also used as the identification
(location) No. of parts in Figures.
B : Part to be removed or installed.
C : Fig. No. showing Procedure or Part Location.
D : Identification of part to be removed, unhooked, unlocked,
released, unplugged, unclamped, or unsoldered.
2(S-1)=2 Screws(S-1);
3(L-1)=3 Locking Tabs(L-1)
1-1. DISASSEMBLY OF CABINET PARTS
Model : A,B,C,D,E,F,G,H,,I,J,K
DISASSEMBLY FLOWCHART
This flowchart indicates the disassembly steps of the cabinet
parts and the P.C. Boards in order to gain access to the item(s)
to be serviced. When reassembling, perform the step(s) in the
reverse order.
Caution : Disconnect AC Plug before disassembly.
A. MECHANICAL ADJUSTMENT PROCEDURES
II. ADJUSTMENT PROCEDURES
Note
Back Cover 1
Operation I
and
Operation II
C.B.A.s 4
CRT Unit
3
VCR Unit 2
Mechanism Chassis
11
Cassette Up Ass'y 10
VCR Main C.B.A.
9
TV Stereo
Amp C.B.A. 5
TV Main C.B.A. 7
VCR Chassis Unit
8
Top Shield Plate Ass'y 6
Model : K
Fig. D1
B C
A
D