Panasonic OmniVision PV-D4745, Руководство по обслуживанию

Страница: 15 / 73

4.10. MECHA MANUAL MODE
In shut off condition or in Service Mode, press the CH UP
button on the unit and CH UP key on the remote together
without a cassette.
In this mode, Loading or Unloading operation can be confirmed
by pressing the FF or REW key on the remote.
Fig. 10-1
To release from this mode, disconnect AC Plug.
Note:
When Loading with no cassette tape, push the portion (A)
on Cassette Holder Unit so that the Sefety Lever clear the
2 Tabs as show in below.
Fig. 10-2
4.11. TRACKING CENTER MODE
(TRACKING FIX AT CENTER)
Insert the Cassette tape. Set the unit into Service Mode. Press
CH UP button and CH DOWN button on unit together in Play
back mode. “TRACKING CENTER” will be displayed on the TV
monitor.
In this mode, the tracking is fixed at center. (Auto tracking and
manual tracking functions are not operational.)
Fig. 11-1
To release from this mode, press CH UP button and CH
DOWN button on unit together again.
4.12. HOW TO RESET ALL MEMORY
FUNCTIONS
To reset all memory functions to factory setting (if relocating the
Deck, or if initial setup needs to be redone), press and hold
both
VCR PLAY and CH UP buttons on the unit for more than
5 seconds in power on and no cassette inserted condition.
The power will shut off.
Fig. 12-1
15
PV-D4735S / PV-D4745 / PV-D4745S / PV-D4745S-K