13
D
If Auto Setup has previously been completed the VCR will not start Auto Setup
automatically. In this case you can re-start Auto Setup again. See page 36.
D
If you want to cancel Auto Setup before it has finished, press the
EXIT
button.
You can restart Auto Setup again. See page 36.
VCR Auto Setup with 21-pin Scart cable
(Automatic tuning)
Datum / Zeit
Clock set
Time : 12 : 00 : 00
Date : 11. 6. 04
MANUAL
!
Press
to set the correct time and date.
!
Press the
ENTER
button to finish this setting.
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
D
Mind that a wrong date or time will influence the programmed recording of TV
programmes (don't forget to change summer time and winter time).
You can complete the Owner ID now or skip this step and do it later. To do it
later, press the
EXIT
button. Your VCR is now ready to use.
!
To set the Owner ID now, press the
Numeric
buttons or
to enter a
four-digit PIN number.
!
Press , to correct the digit.
!
Make sure that you will remember the PIN number (make a note of it).
!
Press the
ENTER
button twice to confirm.
!
Enter the [Name], [House No] and [Postcode] in the same way.
!
Press the
ENTER
button to confirm each entry.
!
Press the
EXIT
button to leave the Owner ID screen.
!
You will now see the TV picture. Your VCR is now ready to use.
Owner ID
!
Turn on your television set.
!
With the
Stand-by/on switch
turn on the VCR.
Automatic tuning for all available TV stations begins.
Approximate duration is 5 minutes.
!
After Automatic tuning has finished, press
EXIT
.
The Owner ID screen will appear.
Owner ID
PIN number : ****
Name : **************
House No : ***********
Postcode : ***********
:
select
:
store
:
exit
ENTER
EXIT
You now have the opportunity
to enter your details and
help the police crack crime
see instruction book.
VCR Display
Auto Setup
:
exit
EXIT
Tuning : Ch 21
