SV121 HV61
MV21
HV51
MV16
SV121 HV61 HV51 MV21 MV16
SV121 HV61 HV51 MV21 MV16
Checking the timer programme
!
Press
PROG/CHECK
,
the Timer recording menu appears.
!
Press
PROG/CHECK
again or
EXIT
to quit the menu.
Playing back programmed recordings
!
Press
PROG PLAY
.
The device will rewind to the beginning of the recording,
and automatically start playing it back.
Automatic SP/LP selection
A:
If, at the beginning of a timer programme, there is not
enough tape left to complete it, the SP/LP function will
automatically run the tape at LP speed. This ensures that the
entire programme will be recorded. If the LP mode is not
enough to ‘stretch’ the remaining tape to fit, you will not be
able to record all of the TV programmes.
D
It is not possible to automatically activate the EP
mode.
VPS/PDC function
If a TV programme begins or ends earlier or later than planned,
this function synchronises the beginning and end of the
recording session with the actual beginning and end of the TV
programme through a VPS signal transmitted by the TV station.
ON :
The station transmits VPS/PDC signals. You must set the
timer to the time specified in the TV magazines. Use the
special VPS time the TV magazine may indicate.
- - - :
The station does not transmit VPS/PDC signals. Try to set
the start and stop time such that the entire film can be
recorded even if a programme begins or ends earlier or
later than planned.
22
Changing or cancelling a timer programme
!
Press
PROG/CHECK
,
the Timer recording menu appears.
!
With
select the entry you would like to edit,
confirm with
ENTER
.
!
Modify entries with
and confirm with
ENTER
.
!
Press
RESET/CANCEL
to delete a recording.
Timer recording
